New User Instructions:

Before attempting to setup as a server, verify that your mirc can DCC send 
files. No server (OmenServe, or any other) will function if MIRC can not. -
Attempt to START (not receive) a DCC chat - No DCC file sends will ever 
work, with any serving script, if you can not start a DCC chat

Sends that fail are 99% of the time, caused by firewall or router issues

If you have a router, go to www.portforward.com for instruction on your
brand of router

If sends work, but are slow, MIRC/OPTIONS/DCC/FSERVE/MAX CPS change from
8k cap, to 0

======

Setup:

1> unzip distribution file, to anywhere on hard drive, preferably NOT into MIRC folder

2> run omenserve_setup.exe

3> follow setup screen "choose setup location" appears

4> click "select folder" button, find & select MIRC folder, press OK, that should put mirc folder
location in config screen

5> click install button

6> check "auto load script into MIRC" and "view omenserve installation instructions", click 'finish'

7> MIRC will start, and give a script initializing warning message, select yes

8> click OK on MIRC option screen

9> bring up omenserve config screen by pressing F2 or commands/omenserve/omenserve v2.60

10> click "main", ensure that 'main nick for trigger' is your IRC nickname

11> click 'lists', highlight 'default', click add folder, add all folders that contain files to be served. do not add
subdirs, only main dirs, subs will be added automatically.

12> after all file directories have been added, click "generate list"

13> on QuickList screen, select "type file info", click generate list

14> wait for status screen to give list completed message

15> connect to IRC, join channel you wish to serve in

16> open omenserve config screen (F2), click "channel" button

17> select "add channels", highlight channel you wish to add (you must be IN channel, or it will not
appear in this screen), select channel mode, select "default list", click "add channel"

18> click "main", check "Server On" box, click "close"

19> setup complete, you should be serving default list, in channel added.

20> do NOT get fancy, adding additional lists and channels, until you have it working properly
in one channel, with default list. Plenty of time to get fancy after you have a working system.

IMPORTANT!!! If this is an upgrade, open OS config - Skin's page, hit apply to reset colors

=====

Failure to do all the above steps will result in a non-working installation

=====

If you have problems, suggestions etc, use the web support forum at:

          http://www.omenscripts.org
          
Please don't message us on IRC, or email us, we won't answer.

- The OmenScripts Team
